Title:Critical parameters for the partial coalescence of a droplet

Abstract: The partial coalescence of a droplet onto a planar liquid/liquid interface is investigated theoretically by using a dimensional analysis. It mainly depends on the Bond number (gravity vs. surface tension), the Ohnesorge numbers (viscosity in both fluids in contact vs. surface tension) and the density relative difference. An experimental work on 2000 coalescence events is made in order to study the impact of viscosities and gravity on the coalescence process. Global quantities such as the available surface energy of the droplet has been measured during the coalescence. The surface energy is converted into kinetic energy at a constant rate that is independent of the coalescence outcome. The ratio between the daughter droplet size and the mother droplet size is investigated as a function of the dimensionless numbers. Theoretical models are proposed to fit experimental data. The asymmetrical behavior when liquids are inverted indicates that the viscous dissipation is different in both fluids. In the surrounding fluid, the capillary waves are damped during their travel from the bottom to the top of the droplet. Inside the droplet, the capillary waves are mainly damped during their creation at the bottom of the droplet. This unexplored damping mechanism is most probably achieved by the way of the vortex ring that is sometimes observed below the droplet during coalescence. Finally, according to the present theoretical models, predictions are made about the main features of partial coalescence for many couples of immiscible fluids. The maximum number of steps in the cascade has been found to be equal to 11. That could be obtained for an interface between mercury and a non-viscous immiscible liquid.