Title:The characteristic rupture height of the mediating air film beneath an impacting drop on atomically smooth mica

Abstract:Before a droplet can contact a surface during impact, it must first displace the air beneath it. Over a wide range of impact velocities, the air is compressed into a thin film, slowing the progress of the liquid toward the surface. Below a critical impact velocity, the air film remains intact; the droplet rebounds off of the air film without making contact. Above this critical impact velocity, the droplet always makes contact. The initiation of contact formation occurs via a topological transition, whereby the initially connected gas domain is ruptured, and a liquid capillary bridge forms, binding the droplet to the surface. Here we probe this transition in detail around the critical impact velocity using calibrated total internal reflection (TIR) microscopy to monitor the air film profile at high speed during the impact process. Two air film rupture modalities are observed: nucleated contacts, which are isolated and don't correspond to the global minimum air film thickness, and spontaneous contacts, that occur always on a ring centered upon the impact axis where the air film reaches its global minimum. Our measurements show that for impact velocities exceeding the critical velocity for contact initiation, the air film ruptures at a nearly identical height h min ~ 20 nm, for two fluids - silicone oil and a water glycerol mixture. The height and time duration of the air film prior to contact, analyzed for over 180 droplet impact experiments, are consistent with a linear instability driven by van der Waals forces. Impact events of water solution droplets show different statistics for contact nucleation than the silicon oil; nevertheless, a critical impact velocity above which contact always occurs is identified for both liquids.