Title:Extensional rheometry of mobile fluids. Part I: OUBER, an optimized uniaxial and biaxial extensional rheometer

Abstract:We present a numerical optimization of a "6-arm cross-slot" device, yielding several three-dimensional shapes of fluidic channels designed to impose close approximations to ideal uniaxial (or biaxial) stagnation point extensional flow under the constraints of having four inlets and two outlets (or two inlets and four outlets) and Newtonian creeping flow conditions. Of the various numerically-generated geometries, one is selected as being most suitable for fabrication at the microscale, and numerical simulations with the Oldroyd-B and Phan-Thien and Tanner models confirm that the optimal flow fields in the chosen geometry are observed for both constant viscosity and shear thinning viscoelastic fluids. Fabrication of the geometry, which we name the optimized uniaxial and biaxial extensional rheometer (OUBER), is achieved with high precision at the microscale by selective laser-induced etching of a fused-silica substrate. Employing a viscous Newtonian fluid with a refractive index matched to that of the optically transparent microfluidic device, we conduct microtomographic-particle image velocimetry in order to resolve the flow field at low Reynolds number (< 0.1) in a substantial volume around the stagnation point. The flow velocimetry confirms the accurate imposition of the desired and predicted flows, with pure extensional flow at an essentially uniform deformation rate being applied over a wide region around the stagnation point. In Part II of this paper [Haward et al., J. Rheol. submitted (2023)], pressure drop measurements in the OUBER geometry will be used to assess the uniaxial and biaxial extensional rheometry of dilute polymeric solutions, in comparison to measurements made in planar extension using an optimized-shape cross-slot extensional rheometer (OSCER, Haward et al, Phys. Rev. Lett., 2012).