Title:Confined flow of suspensions modeled by a frictional rheology

Abstract:We investigate in detail the problem of confined pressure-driven laminar flow of neutrally buoyant non-Brownian suspensions using a frictional rheology based on the recent proposal of Boyer et al., 2011. The friction coefficient and solid volume fraction are taken as functions of the dimensionless viscous number I defined as the ratio between the fluid shear stress and the particle normal stress. We clarify the contributions of the contact and hydrodynamic interactions on the evolution of the friction coefficient between the dilute and dense regimes reducing the phenomenological constitutive description to three physical parameters. We also propose an extension of this constitutive law from the flowing regime to the fully jammed state. We obtain an analytical solution of the fully-developed flow in channel and pipe for the frictional suspension rheology. The result can be transposed to dry granular flow upon appropriate redefinition of the dimensionless number I. The predictions are in excellent agreement with available experimental results, when using the values of the constitutive parameters obtained independently from stress-controlled rheological measurements. In particular, the frictional rheology correctly predicts the transition from Poiseuille to plug flow and the associated particles migration with the increase of the entrance solid volume fraction. We numerically solve for the axial development of the flow from the inlet of the channel/pipe toward the fully-developed state. The available experimental data are in good agreement with our predictions. The solution of the axial development of the flow provides a quantitative estimation of the entrance length effect in pipe for suspensions. A analytical expression for development length is shown to encapsulate the numerical solution in the entire range of flow conditions from dilute to dense.