Title:Activation and radiation damage in the environment of hadron accelerators

Abstract:A component which suffers radiation damage usually also becomes radioactive, since the source of activation and radiation damage is the interaction of the material with particles from an accelerator or with reaction products. However, the underlying mechanisms of the two phenomena are different. These mechanisms are described here. Activation and radiation damage can have far-reaching consequences. Components such as targets, collimators, and beam dumps are the first candidates for failure as a result of radiation damage. This means that they have to be replaced or repaired. This takes time, during which personnel accumulate dose. If the dose to personnel at work would exceed permitted limits, remote handling becomes necessary. The remaining material has to be disposed of as radioactive waste, for which an elaborate procedure acceptable to the authorities is required. One of the requirements of the authorities is a complete nuclide inventory. The methods used for calculation of such inventories are presented, and the results are compared with measured data. In the second part of the paper, the effect of radiation damage on material properties is described. The mechanism of damage to a material due to irradiation is described. The amount of radiation damage is quantified in terms of displacements per atom. Its calculation and deficiencies in explaining and predicting the changes in mechanical and thermal material properties are discussed, and examples are given.