Title:Transverse emittance dilution due to coupler kicks in linear accelerators

Abstract: One of the main concerns in the design of low emittance linear accelerators (linacs) is the preservation of beam emittance. Here we discuss one possible source of emittance dilution due to transverse electromagnetic fields in the accelerating cavities of the linac caused by the power coupler geometry. It is common wisdom that emittance growth from coupler kicks can be strongly reduced by having the coupler location alternate from above to below the beam pipe so that the coupler kick from one cavity is compensated by that of the next. While this is correct, alternating the coupler location requires large technical changes in superconducting cryomodules where cryogenic pipes are arranged parallel to a string of several cavities.
We show here that cavities with high external $Q$ have coupler kicks that change the sign of their phase when the coupler is moved from before to after the cavity, as long as one accelerates on crest. This implies that the emittance growth from one cavity can be canceled by the next, provided the coupler has been moved from before to after the cavity. All couplers can then be mounted on the same side of the beam pipe, and cryomodules become far simpler to construct.
Canceling emittance growth by symmetric arrangements is always sensitive to deviations from perfect symmetry, and we therefore analyze the effect of an independent detuning for each cavity and find that the cancellation does not depend on detuning. Other effective methods for reducing coupler kicks are also investigated of which symmetrization of the cavity geometry in the coupler region with the addition of a stub opposite the coupler is the most promissing.