Title:Radiated energy fraction of SPI-induced disruptions at ASDEX Upgrade

Abstract:Future large tokamaks will operate at high plasma currents and high stored plasma energies. To ensure machine protection in case of a sudden loss of plasma confinement (major disruption), a large fraction of the magnetic and thermal energy must be radiated to reduce thermal loads. The disruption mitigation system for ITER is based on massive material injection in the form of shattered pellet injection (SPI). To support ITER, a versatile SPI system was installed at the tokamak ASDEX Upgrade (AUG). The AUG SPI features three independent pellet generation cells and guide tubes, and each was equipped with different shatter heads for the 2022 experimental campaign. We dedicated over 200 plasma discharges to the study of SPI plasma termination, and in this manuscript report on the results of bolometry (total radiation) analysis. The amount of neon inside the pellets is the dominant factor determining the radiated energy fraction (frad). Large and fast fragments, produced by the $12.5^\circ$ rectangular shatter head, lead to somewhat higher values of frad compared to the $25^\circ$ circular or rectangular heads. This effect is strongest for neon content of $< 4\times10^{20}$ neon atoms injected, where a higher normal velocity component (larger fragments) seems slightly beneficial. While full-sized, 8 mm diameter, pure deuterium (D2) pellets lead to a disruption, the 4 mm or shortened 8 mm pellets of pure D2 did not lead to a disruption. The disruption threshold for pure D2 is found to be around $1\times10^{22}$ deuterium molecules inside the pellet. While the radiated energy fraction of non-disruptive SPI is below 20%, this is increased to 40% during the TQ and VDE phase of the disruptive injections. For deuterium-neon-mix pellets, frad values of $< 90$% are observed, and the curve saturates around 80% for 10% neon mixed into the 8 mm pellets ($2\times10^{21}$ neon atoms).