Title:Investigation of low band gap silicon alloy thin film solar cell for improving short and long wavelength response

Abstract:Numerical simulation of a solar cell can provide various information that can be useful to maximize its power conversion efficiency (PCE). In that respect we carried out a set of numerical simulation using AFORS-HET simulation program. Separately, in order to get a better understanding, the optical absorption in individual layers devices were analyzed. Current-voltage characteristic curve of a reference cell (Cell-A) was used as the starting device. The PCE of the reference device was $8.85\%$ with short circuit current density $J_{sc}$ of 15.43 mA/cm$^{2}$ and fill factor (FF) of $68.3\%$. However, it was noticed that the reference cell had high parasitic optical absorption at the window layer and the device structure was also not optimized. After suitable optimization the PCE of this device (Cell-B2) improves to $11.59\%$ ($J_{sc}$ and FF of 13.0 mA/cm$^{2}$ and $87\%$ respectively). The results show that the effective optical absorption in the active layer can be improved significantly by optimizing the device structure. The short wavelength response can be improved by reducing the parasitic optical absorption by the doped window layer, while its long wavelength response improves by raising effective absorption length of the active layer. Furthermore, its optimum thickness, for the highest possible PCE, is found to be dependent upon the material properties, more importantly on its defect density.