Physics > Instrumentation and Detectors
[Submitted on 23 Feb 2024 (this version), latest version 14 May 2024 (v2)]
Title:Validation of the VUV-reflective coating for next-generation liquid xenon detectors
View PDF HTML (experimental)Abstract:Coating detector materials with films highly reflective in the ultraviolet region improves sensitivity of the rare-event detectors that use liquid xenon. In this work, we investigate the MgF$_2$-Al-MgF$_2$ coating designed to achieve high reflectance at 175 nm, the mean wavelength of liquid xenon (LXe) scintillation. The coating was applied to an unpolished, passivated copper substrate mimicking a realistic detector component of the proposed nEXO experiment, as well as to two unpassivated substrates with "high" and "average" levels of polishing. After confirming the composition and morphology of the thin-film coating using TEM and EDS, the samples underwent reflectance measurements in LXe and gaseous nitrogen (GN2). Measurements in LXe exposed the coated samples to -100 $°$C for several hours. No peeling of the coatings was observed after several thermal cycles. Polishing is found to strongly correlate with the measured specular reflectance ($R_{\mathrm{spec}}$). In particular, 5.8(5)% specular spike reflectance in LXe was measured for the realistic sample at 20$°$ of incidence, while the values for similar angles of incidence on the high and average polish samples are 62.3(1.3)% and 27.4(7)%, respectively. At large angles (66°--75$°$), the $R_{\mathrm{spec}}$ in LXe for the three samples increases to 23(5)%, 80(8)%, and 84(18)%, respectively. The $R_{\mathrm{spec}}$ at around 45$°$ was measured in both GN2 and LXe for average polish sample and shows a reasonable agreement. Importantly, the total reflectance of the samples is comparable and estimated to be 92(8)%, 85(8)%, and 83(8)% in GN2 for the realistic, average, and high polish samples, respectively. This is considered satisfactory for the next-generation LXe experiments that could benefit from using reflective films, such as nEXO and DARWIN, thus validating the design of the coating.
Submission history
From: Igor Ostrovskiy [view email][v1] Fri, 23 Feb 2024 08:15:09 UTC (6,057 KB)
[v2] Tue, 14 May 2024 05:11:59 UTC (6,089 KB)
Current browse context:
physics.ins-det
References & Citations
Bibliographic and Citation Tools
Bibliographic Explorer (What is the Explorer?)
Litmaps (What is Litmaps?)
scite Smart Citations (What are Smart Citations?)
Code, Data and Media Associated with this Article
CatalyzeX Code Finder for Papers (What is CatalyzeX?)
DagsHub (What is DagsHub?)
Gotit.pub (What is GotitPub?)
Papers with Code (What is Papers with Code?)
ScienceCast (What is ScienceCast?)
Demos
Recommenders and Search Tools
Influence Flower (What are Influence Flowers?)
Connected Papers (What is Connected Papers?)
CORE Recommender (What is CORE?)
arXivLabs: experimental projects with community collaborators
arXivLabs is a framework that allows collaborators to develop and share new arXiv features directly on our website.
Both individuals and organizations that work with arXivLabs have embraced and accepted our values of openness, community, excellence, and user data privacy. arXiv is committed to these values and only works with partners that adhere to them.
Have an idea for a project that will add value for arXiv's community? Learn more about arXivLabs.