Title:Improving the efficiency of small animal 3D printed compensator IMRT with total variation regularization

Abstract:Purpose: There is growing interest in the use of modern 3D printing technology to implement intensity-modulated radiation therapy (IMRT) on the preclinical scale which is analogous to clinical IMRT. However, current 3D-printed IMRT methods suffer from long delivery times, excess filament usage, and complex modulation patterns. In this work, we have developed a total variation regularization (TVR) approach to address these issues.
Methods: TVR-IMRT, a technique designed to minimize the intensity difference between neighboring beamlets, was used to optimize the beamlet intensity map, which was then converted to corresponding compensator thicknesses in copper-doped PLA filament. IMRT and TVR-IMRT plans using five beams were generated to treat a mouse heart while sparing lung tissue. The individual field doses and composite dose were delivered to film and compared to the corresponding planned doses using gamma analysis.
Results: TVR-IMRT reduced the total variation of both the beamlet intensities and compensator thicknesses around 50\ when compared to standard 3D printed compensator IMRT. The total mass of compensator material consumed and radiation beam-on time were reduced by 20-30%, while DVHs remained comparable. Gamma analysis passing rate with 3%/0.3mm criterion was 89.07% for IMRT and 95.37% for TVR-IMRT.
Conclusion: TVR can be applied to small animal IMRT in order to produce fluence maps and subsequent 3D-printed compensator patterns with less total variation, facilitating 3D printing and reducing the amount of filament required. The TVR-IMRT plan required less beam-on time while maintaining the dose conformity when compared to a traditional IMRT plan.