Title:Optimized Designs for Very Low Temperature Massive Calorimeters

Abstract:The baseline energy-resolution performance for the current generation of large-mass, low-temperature calorimeters is $>2$ orders of magnitude worse than theoretical predictions. A detailed study of several calorimetric detectors suggests that a mismatch between the sensor and signal bandwidths is the primary reason for suppressed sensitivity. With this understanding, we propose a detector design in which a thin-film Au pad is directly deposited onto a massive absorber that is then thermally linked to a separately fabricated TES chip via an Au wirebond, providing large electron-phonon coupling (i.e. high signal bandwidth), ease of fabrication, and cosmogenic background suppression. Interestingly, this design strategy is fully compatible with the use of hygroscopic crystals (NaI) as absorbers. An 80-mm diameter Si light detector based upon these design principles, with potential use in both dark matter and neutrinoless double-beta decay, has an estimated baseline energy resolution of 0.35eV, 20x better than currently achievable. A 1.75 kg ZnMoO$_{4}$ large-mass calorimeter would have a 3.5eV baseline resolution, 1000x better than currently achieved with NTDs with an estimated position dependence $\frac{\Delta E}{E}$ of 6$x$10$^{-4}$, near or below the variations found in absorber thermalization in ZnMoO$_{4}$ and TeO$_{2}$. Such minimal position dependence is made possible by forcing the sensor bandwidth to be much smaller than the signal bandwidth. Further, intrinsic event timing resolution is estimated to be $\sim$170 $\mu$s for 3 MeV recoils in the phonon detector, satisfying the event-rate requirements of next-generation neutrinoless double-beta decay experiments. Quiescent bias power for both of these designs is found to be significantly larger than parasitic power loads achieved in the SPICA/SAFARI infrared bolometers.